If you are tired of cartridge case prepping the old way the RCBS Brass Boss is an absolute game changer.
I got a chance to test out the RCBS Brass Boss and here is what it offers the handloader.
Sometimes you come across a product that you never knew you needed until you see it. The RCBS Brass Boss is certainly one of those wonderful products that saves you time at the reloading bench. It also saves your wrists from carpal tunnel syndrome and your fingers from split skin and broken fingernails. Oh those tidbits alone are game changers for the home reloader!
Before we dive into my actual use of the RCBS Brass Boss, let’s take a look at what RCBS says about it:
If you are looking for the ultimate case prep tool to completely prepare trimmed brass before reloading; look no further than the RCBS Brass Boss. The Brass Boss was designed from the ground up to be the ultimate case prep station.
The RCBS Brass Boss features industry-first variable speed rotating stations that are easily adjustable to remove chatter. Two stations are high-speed stations that can turn up to 550 RPM while the other four stations turn up to 350 RPM. The Brass Boss ships with tools for all six stations including an inside VLD chamfering tool, outside deburring tool, primer pocket cleaner (small/large), military crimp remover (small/large), primer pocket uniformer (small/large), case neck brushes (four diameters) and a tube of dry case neck lubricant. If you are looking to save time and process brass as efficiently as possible look no further than the Brass Boss. Limited 2-year warranty.
THE BRASS BOSS INCLUDES THE FOLLOWING:
| Inside VLD Chamfering Tool | Large Primer Pocket Uniformer | |
| Outside Deburring Tool | Small Primer Pocket Uniformer | |
| Case Neck Brushes | Small Primer Pocket Cleaner | |
| Small Military Crimp Remover | Large Primer Pocket Cleaner | |
| Large Military Crimp Remover | 120-240 VAC Multi-Country Power Supply |
The RCBS Brass Boss is packed full of all of the useful tool heads you could ever ask for. No need to buy any separate parts so you can start your cartridge case prepping immediately.
Right out of the box the set up of the RCBS Brass Boss is quite simple. As stated earlier, two stages are faster than the other ones. This is handy for your VLD chamfering tool ad outside deburring tool.
When all ready for use, the RCBS Brass Boss looks like this. The tool heads are spaced apart with plenty of room to work. Also two non-rotating ports are handy for the case neck brushes.
The power and speed knob allows you to easily turn on, off, and change tool speeds quickly.
Below is the RCBS Brass Boss turned on to full speed. You can choose that speed or much slower for your needs.
The tool bin is a handy spot to store your extra tool heads. Never lose your spare parts! It also has a handy round spot that holds your dry case neck lubricant (included). RCBS has thought of it all!
If you are looking for the best way to prep your cases I highly suggest you take a look at the RCBS Brass Boss. Like all RCBS products, they are built with quality and they stand behind their products.